| Issue | Resolution |
|---|
No Audio | - Make sure the volume on the podium is up high enough
- Buttons located next to “On”/“Off” buttons (up and down arrow)
- Check to see if amp is on
- Located in the podium at the bottom
- Will see a blue circle light if on
- Check to see if volume knobs on amp are turned down
|
| No Audio While Using Computer | - Follow all directions above
- Volume on computer must be turned up
- Make sure the audio cable is properly plugged into computer
|
No Computer Image While Using VGA Cable | Configuring Computers for Projection - Restart computer
- Switch to another input for several seconds before switching back to computer input
- Display resolution must be set to 1024x768
- (Other resolutions may work but this is optimum for the projector)
- Adjust laptop for either dual or external monitor support
- Check VGA adaptor to make sure no pins are bent or pushed in
- VGA adaptors usually have at least one missing pin. That is normal
- If customer is using a Mac, they must provide their own VGA adaptor
- If using a Mac adaptor, unplug adaptor from computer end and plug it back in
|
DVD/VHS Not Playing in Combo Deck | - Eject the DVD/VHS and reload it, this sometimes helps
- DVD player sometimes will not play a burned copy
|
Doc Camera Not Turning on | - Make sure all cables are plugged into the back of Doc Camera
- There is a power switch on the side of the Doc Camera that may need to be turned on
|