...
No Computer Image While Using VGA Cable
Configuring Computers for Projection
- Restart computer
- Switch to another input for several seconds before switching back to computer input
- Display resolution must be set to 1024x768
- (Other resolutions may work but this is optimum for the projector)
- Adjust laptop for either dual or external monitor support
- Check VGA adaptor to make sure no pins are bent or pushed in
- VGA adaptors usually have at least one missing pin. That is normal
- If customer is using a Mac, they must provide their own VGA adaptor
- If using a Mac adaptor, unplug adaptor from computer end and plug it back in
...