No key needed to access rooms (Locks disabled, No code needed)

Issue	Resolution
No Audio	Make sure the volume on the podium is up high enough Buttons located next to “On”/“Off” buttons (up and down arrow) Check to see if amp is on Located in the podium at the bottom Will see a blue circle light if on Check to see if volume knobs on amp are turned down
No Audio While Using Computer	Follow all directions above Volume on computer must be turned up Make sure the audio cable is properly plugged into computer
No Computer Image While Using VGA Cable	Configuring Computers for Projection Restart computer Switch to another input for several seconds before switching back to computer input Display resolution must be set to 1024x768 (Other resolutions may work but this is optimum for the projector) Adjust laptop for either dual or external monitor support Check VGA adaptor to make sure no pins are bent or pushed in VGA adaptors usually have at least one missing pin. That is normal If customer is using a Mac, they must provide their own VGA adaptor If using a Mac adaptor, unplug adaptor from computer end and plug it back in
DVD/VHS Not Playing in

...

Combo Deck

Doc Camera Not Turning on

Make sure all cables are plugged into the back of Doc Camera
There is a power switch on the side of the Doc Camera that may need to be turned on

Resources: