Podium (Locks disabled, No code needed)
No Audio
Make sure the volume on the podium is up high enough
Buttons located next to “On”/“Off” buttons (up and down arrow)
Check to see if amp is on
Located in the podium at the bottom
Will see a blue circle light if on
Check to see if volume knobs on amp are turned down
No Audio While Using Computer
Follow all directions above
Volume on computer must be turned up
Make sure the audio cable is properly plugged into computer
No Computer Image While Using VGA Cable
Restart computer
Switch to another input for several seconds before switching back to computer input
Display resolution must be set to 1024x768
(Other resolutions may work but this is optimum for the projector)
Adjust laptop for either dual or external monitor support
Check VGA adaptor to make sure no pins are bent or pushed in
VGA adaptors usually have at least one missing pin. That is normal
If customer is using a Mac, they must provide their own VGA adaptor
If using a Mac adaptor, unplug adaptor from computer end and plug it back in
DVD/VHS Not Playing in DVD/VCR Player
Eject the DVD/VHS and reload it, this sometimes helps
DVD player sometimes will not play a burned copy
Doc Camera Not Turning on
Make sure all cables are plugged into the back of Doc Camera
There is a power switch on the side of the Doc Camera that may need to be turned on