Racks

Racks

No Audio

Make sure the volume on the rack is up high enough

Buttons located next to “On”/“Off” buttons (up and down arrow)

If applicable, check to make sure amp is on and master volume is turned up

No Audio While Using Computer

Follow all directions above

Volume on computer must be turned up

Make sure the audio cable is properly plugged into the rack and computer

No Computer Image While Using VGA Cable

Restart computer

Switch to another input for several seconds before switching back to computer input

Display resolution must be set to 1024x768

(Other resolutions may work but this is optimum for the projector)

Adjust laptop for either dual or external monitor support

Check VGA adaptor to make sure no pins are bent or pushed in

VGA adaptors usually have at least one missing pin. That is normal

If customer is using a Mac, they must provide their own VGA adaptor

DVD/VHS Not Playing in DVD/VCR Player

Eject the DVD/VHS and reload it, this sometimes helps

DVD player sometimes will not play a burned copy

Microphone issues

Make sure amp is on and master volume is up

If microphone does not turn on, replace battery with spare

Make sure receiver is turned on